General Hardware Definitions Note: In this category, with a few exceptions (e.g. Duo Dock), all items are reported whether or not they are applicable to your configuration. Items marked “NA” are either not available on your machine or do not apply given current settings. [Text] = Item only exists under given circumstance {Text} = Expect positive response only under given circumstance • Machine = Type of macintosh. The (XXX) is the actual ID number assigned to the machine by Apple. It attempts to differentiate between different models on a hardware level, e.g. the Classic II and the Performa 200 have identical numbers because their hardware is identical. This is somewhat inconsistent in the case of the LC and LC II where they have identical numbers but a MC68020 and MC68030 processor respectively. ◊ Total Hours in Use = Number of hours which the Mac has been on since it was manufactured ◊ Date Manufactured = Date of manufacture • • • • • • • • • • • • • • • • • • • • • • • • • • • • Addressing Modes Status : ◊ Machine is 32-Bit capable = Does the machine have a 32-bit Memory Manager? + System Zone is 32-Bit compatible = Are the block headers in the System Zone 32-bit clean? + Booted in 32-Bit mode = Did the machine start in 32-bit mode? • CPU Attributes : ◊ CPU = Main processing chip (Central Processing Unit) + CPU Speed = In MHz. The (XXX) returns a value which helps determine the speed of new processors. If the CPU speed shows as “UnKnown”, please report this number to us along with the Model Name from the nameplate on your computer and the Machine ID number provided under the Machine field above. + Instruction Cache is enabled = Yes/No + Data Cache is enabled = Yes/No ◊ FPU = Math chip for floating point calculations (Floating Point Unit ) + Hardware FPU = Yes/No ◊ MMU = Chip for implementing Virtual Memory (Memory Management Unit) • Duo Dock Attributes : Since Docks generally prevent the user from utilizing features built into the Duo, this category supplements normal Duo hardware attribute information. [Docked PowerBook w/o Virtual Memory Running] ◊ Dock Has ADB Connector = Yes/No ◊ Dock Has FPU = Yes/No ◊ Dock Has Floppy Disk Port = Yes/No ◊ Dock Has SCSI Port = Yes/No ◊ Dock Has SCSI Disk Mode = This mode supports the use of the Duo’s hard Disk by another computer ◊ Dock Has Built-In Video = Yes/No ◊ Dock Has Built-In Network Services = Yes/No ◊ Dock Has Built-In Modem = Yes/No ◊ Dock Has Modem Port = Yes/No ◊ Dock Has Printer Port = Yes/No ◊ Dock Has Sound Input Connector = Yes/No ◊ Dock Has Sound Output Connector = Yes/No ◊ Dock Has Stereo Output = Yes/No ◊ Dock Has Mixed Channels on Ext Spkr • Keyboard (Active) = Type of keyboard which was last used. There may be more than one keyboard connected at a time. Check the ADB report • Memory Related : ◊ RAM Size = Total bytes of RAM installed (Random Access Memory) ◊ Virtual Memory is In Use = Virtual Memory is located on the hard disk but treated by the computer as if it were RAM memory + Logical Page Size = Number of bytes exchanged between RAM and disk at one time ◊ Virtual + RAM Memory Size = Total number of bytes of memory available to system and processes ◊ System : + Highest Usable RAM Address = Highest RAM address available to applications + High RAM Used by System = RAM allocated to video and sound buffers, and reserved by INITs, etc. at startup + Low RAM Used by System = RAM allocated to vectors, global variables, and dispatch tables + Memory Used by Finder = RAM occupied by the Finder + Memory Used by System Heap = RAM allocated to the system heap. This is not only used by the system as applications can also allocate space in the system heap. This includes the space taken by the Disk Cache, if any - Memory Used by Disk Cache = RAM used by the Disk Cache set in the Memory (Sys 7) or General (Sys 6) control panel. In the Sys 6 Control Panel, the “Off” button does not work, so the Cache is always 32K min + Total System Related Memory = Total Memory used by system. For System 7, this value should approximate the value for the System found in the “About This Macintosh” dialog for the System. For System 6, the comparable comparison would add the Finder value in the dialog to the System. + System Heap Free Space = Free Space currently available in System Heap. Corresponds to the white space in the bar next to System in “About this Macintosh” ◊ CPU can check Parity = Is machine equipped for Parity RAM? This type of RAM is used when detection of any RAM anomaly is critical. This is a special order capability for computers used in sensitive applications + Parity checking is enabled = Is parity checking enabled? {Previous Yes} • Miscellaneous Hardware Attributes : ◊ Has VIA1 = VIA1 (Versatile Interface Adapter)? This VIA provides support for the ADB, floppy drives, real-time chip, modem port, etc. ◊ Has VIA2 =VIA2? This chip was added in machines starting with the Mac II. This VIA provides support for Nubus interrupts, Sound Chip interrupts, etc. If this is “No” on newer machines, it means that these functions are handled by other newer chips, such as an RBV or OSS ◊ Has RBV = RBV (Ram Based Video) built-in? ◊ Has VISA RBV = VISA RBV built-in? ◊ Has DAFB = DAFB video built-in? ◊ Has VDAC = VDAC (Video D/A and CLUT) built-in? ◊ Has RSB = RSB (Ram Based Sound) buffer? ◊ Has OSS = OSS (Operating System Support chip)? ◊ Has SCC IOP = SCC (Serial Communications Controller) IOP (I/O Processor)? The SCC controls the serial phone and printer ports and is available on all machines. The IOP feature applies to machines which use an IOP to buffer the SCC function {IIfx, Quadra} + Has SCC Direct Access On = Is the IOP set to a mode to allow direct access to the SCC? This is necessary for compatibility with some serial devices. {Previous Yes} ◊ Has IWM/SWIM = Is the floppy drive chip the original IWM/SWIM ([Super] Woz Integrated Machine)? This chip is named after Steve Wozniak, co-founder of Apple and designer of the Apple II ◊ Has SWIM IOP = Is the machine’s SWIM controlled by an IOP? {IIfx,Quadra} ◊ Has PWM = PWM disk speed buffer? ◊ Has SCSI Orig = The original SCSI (Small Computer System Interface) 5380 chip running in normal mode? This chip is used to control the SCSI devices (e.g. hard Drives) attached to the machine ◊ Has SCSI DMA = DMA (Direct Memory Access) mode of the SCSI 5380 chip {IIfx} ◊ Has SCSI 961 = SCSI 53C96 chip on the internal bus? {Quadra} ◊ Has SCSI 962 = SCSI 53C96 chip on the external bus? {Quadra} ◊ Has ASC = ASC (Apple Sound Chip)? This chip provides sound for the internal speaker ◊ Has SONIC = This type of sound chip built-in? ◊ Has PGC = PGC (Parity Generation Chip)? ◊ Has RPU = RPU (Random Parity Unit)? ◊ Has OMC = OMC (Orwell Memory Controller)? ◊ Has FMC = FMC (Fitch Memory Controller)? ◊ Has JMC = JMC (Jaws Memory Controller)? ◊ Has DSP = ASC (Apple Sound Chip)? This chip provides sound for the internal speaker ◊ Has Software Power-off = Can the machine’s power be turned off under the control of software? • Network : ◊ Chooser (User) Name = Name given to the machine in the Chooser which, in general, specifies the given name of the user/machine in Network related operations ◊ Machine Name = Network name of machine ◊ AppleTalk is Running = Yes/No + Appletalk Version = Version number + Zone Name = Zone containing this machine + Network Number = Network containing this machine + Node = Node number of this machine + File Sharing is On = Yes/No + File Linking is On = Yes/No + Has Standard NBP = Are standard Name Binding Protocols present? ◊ AppleTalk Connection Type = Type of network currently carrying AppleTalk. + EtherNet Hardware Address = Address of Ethernet card or built-in Ethernet port + Slot# = Nubus/PDS Slot containing LAP hardware or Built-In connector ◊ Apple Remote Access (ARA) is Present = Yes/No + ARA Client is Present = Yes/No + ARA Multi-Port Server is Present = Yes/No + ARA 2.0 Features are Present = Yes/No ◊ MacTCP is Running = MacTCP allows the Mac to communicate with TCP/IP networks (e.g. Internet) using network connections such as Ethernet, LocalTalk, and EtherTalk + MacTCP Version = Version number + IP Address = TCP/IP address of this machine + Gateway Address = Address of gateway connecting this network to the TCP/IP network + Default Domain Server Name = Name of default server which translates TCP/IP names to IP addresses + Default Domain Server Address = Address of default server ◊ Open Transport is Present = Yes/No. Coordinates the services of network devices • Printer Info : ◊ Current Printer Driver = Name of Driver currently specified in the Chooser. + Printer Driver Version = Version ◊ Current Printer = Name of Printer currently specified in the Chooser. + Printer Type = Laser, serial, etc + Printer Zone = If networked printer, the name of the Zone in which it is located • ROM Attributes : ◊ ROM Size = Size of ROM (Read Only Memory) chip containing most of the system’s functionality ◊ ROM Version = Version number of ROM chip + ROM is Universal = Is this the new standard version of the ROM? + ROM is 32 Bit Clean = Yes/No ◊ ROM Sub-Version = Used to distinguish minor changes to the basic ROM version ◊ ROM Checksum = Sometimes used to identify ROM version in older machines ◊ ROM Start = Address indicating the beginning of ROM. This address can be compared against the address returned in the Traps listings to determine if a trap has been patched • Sound Attributes : ◊ Has Stereo capability = Can the machine process stereo sounds? ◊ Stereo Sound is Combined for Internal Speaker = Is the stereo mixed for play though the internal speaker? ◊ Sound Input Mgr is Present = Is the machine capable of sound input? ◊ Sound Input Device is Present = Does the machine have any sound input device? + Built-In Sound Input Device is Present = Is the sound input device built-in? {Previous Yes} ◊ Can Play and Record Together = Can you play and record simultaneously? ◊ Can Play and Record 16-bit Audio = Yes/No ◊ Can Record Stereo = Yes/No ◊ Sound Input Port can accept Line Level Mic = Yes/No ◊ Sound Mgr Supports Multiple Channels = Yes/No {Sound Manager 3.0} ◊ SoundPlayDoubleBuffer is Present = Yes/No {Sound Manager 3.0} ◊ Sound Mgr Supports 16-bit Audio = Yes/No {Sound Manager 3.0} • Table Base Addresses : ◊ OS Trap Table = Address in hex ◊ Tool Trap Table = Address in hex ◊ Extended Tool Trap Table = Address in hex {Mac+/SE, System 7}